Cat M317F

UTGÅTT PRODUKT

Dette produktet er utgått fra vårt sortiment, og erstattet med Cat M317.

Se brosjyre Send Forespørsel

Om Cat M317F

Dette produktet er utgått fra vårt sortiment. Working hard has never been easier with Cat® F Series Wheeled Excavators. The M317F compact radius increases your fleet versatility by introducing you into new possible markets like those with tight-quarter tasks and turning radius constraints such as road construction or small job sites. These machines are designed to help you take on the wide variety of challenges you face every day, and at a lower cost.

Denne maskinen kan også leveres med hytteløft for sanering og resirkulering. Ta kontakt med din lokale selger.

Spesifikasjoner

Motor

Motormodel	Cat C4.4 with Twin Turbo
Net Power	150 HP
Bore	4.1 in
Stroke	5 in
Displacement	268.5 in³
Maximum Torque - 1,400 rpm	523 ft·lbf
Ratings	1800 r/min
Number of Cylinders - In Line	4
Note	*Metric values.
Engine Power - Maximum Gross - ISO 14396	117 kW (157 hp [159 hp/PS]*)
Emissions	Meets Stage IV emission standards.
Engine Power - Maximum Net - ISO 9249/SAE J1349	112 kW (150 hp [152 hp/PS]*)

Swing Radius and Key Dimensions

Maximum Shipping Length - With Long Stick	27.75 ft
Tail Swing Radius	5.83 ft
Maximum Width - With Wide Axle, Parallel Blade	9 ft

Weights

VA Boom - Rear Dozer Only	38691 lb
Offset Boom - Rear Dozer, Front Outriggers	42020 lb
Operating Weight*	17 550 to 18 550 kg (38,691 to 40,896 lb)
VA Boom - Rear Dozer, Front Outriggers	40896 lb
Counterweight	9480 lb
Note	*Includes medium stick, counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (600 kg/1,323 lb), dual pneumatic tires. Weight varies depending on configuration.

Swing Mechanism

Swing Speed	8.1 r/min
Maximum Swing Torque	27289 ft·lbf

Hydraulic System

Maximum Pressure - Implement Circuit - Heavy Lift	5439 psi
Maximum Pressure - Auxiliary Circuit - Medium Pressure	2683 psi
Maximum Flow - Auxiliary Circuit - High Pressure	58 gal/min
Maximum Pressure - Implement Circuit - Normal and Travel Circuit	5076 psi
Maximum Pressure - Auxiliary Circuit - High Pressure	5076 psi
Maximum Flow - Swing Mechanism	18.5 gal/min
Maximum Flow - Implement/Travel Circuit	58 gal/min
Swing Mechanism	4786 psi
System	64.7 gal (US)
Maximum Flow - Auxiliary Circuit - Medium Pressure	12.7 gal/min

Drive

Maximum Travel Speed

19 mile/h

Transmission

Drawbar Pull	23380 lbf
Maximum Forward/Reverse - 2nd Gear	19 mile/h
Maximum Gradeability (17 500 kg/38,580 lb)	70%

Påfyllingskapasitet

Fuel Tank - Total Capacity	77.9 gal (US)
Diesel Exhaust Fluid Tank	5 gal (US)

Undercarriage

Ground Clearance

14.6 in

Working Ranges

VA Boom - 2450 mm (8'0") Stick Length: Dump Height	22.33 ft
VA Boom - 2450 mm (8'0") Stick Length: Digging Height	32.5 ft
Offset Boom - 2450 mm (8'0") Stick Length: Digging Height	32.42 ft
VA Boom - 2450 mm (8'0") Stick Length: Digging Depth	18.67 ft
Offset Boom - 2450 mm (8'0") Stick Length: Digging Depth	18.67 ft
Offset Boom - 2450 mm (8'0") Stick Length: Reach at Ground Level	29.08 ft
VA Boom - 2450 mm (8'0") Stick Length: Reach at Ground Level	29.08 ft
VA Boom - 2600 mm (8'6") Stick Length: Digging Depth	19.25 ft
VA Boom - 2600 mm (8'6") Stick Length: Digging Height	33.58 ft
VA Boom - 2600 mm (8'6") Stick Length: Dump Height	23.33 ft
VA Boom - 2600 mm (8'6") Stick Length: Reach at Ground Level	29.92 ft
Offset Boom - 2450 mm (8'0") Stick Length: Dump Height	22.25 ft
Note	Range values are calculated with GD bucket 1100 mm (43"), 0.8 m3 (1.03 yd3) with tips J250 and CW-30-H.4.N quick coupler with a tip radius of 1574 mm (61.9").

Egenskaper

Features

PERFORMANCE AND PRODUCTIVITY

Cat C4.4 engine meets EU Stage IV emission standards. Emissions technology is transparent – no action required from the operator and no stopping for regeneration.
Dedicated swing pump, allowing faster, smoother combined movements.
Built-in fuel savers, eliminating waste with features like Auto Engine Speed Control, Engine Idle Shutdown and efficient Eco Mode.
“On-Demand” Strategies, to consume just the right amount of fuel.
Similar working ranges, stability and lift capacities as the M316F.
Highly mobile, the M317F can travel up to 30 km/h (19 mph).

EXPAND YOUR CAPABILITIES

Compact design allows an operator to swing with confidence in tight quarters.
Flexible configurations to meet all your needs with various booms/sticks, tires and undercarriages.
“Plug and Play” design, with complete integration of the whole portfolio of Cat attachments. – Auxiliary hydraulics, including high pressure, and quick coupler lines/circuits. – Readiness for all couplers, either Pin Grabber, Dedicated or hydraulic Auto Connect coupler. – The monitor can allow ten hydraulic pump flow and pressure settings at the same time. – Tiltrotator option including all required changes to accommodate the Cat Tiltrotator.
Joystick buttons/sliders can be set up per tool as desired by the operator.

EASY TO OPERATE

A complete package of smart technologies with features like Cruise Control or automatic brake and axle lock. Optional boosters like Ride Control, SmartBoom™, joystick steering are available.
Everything can be adjusted in the cab from the steering column height to the electrically adjustable mirrors.
Ergonomic cab with controls kept to a minimum and conveniently located.
Split-screen monitor to allow quick view of both cameras on the same display.

SAFELY HOME EVERY DAY

Integrated devices to help enforce safe behavior, like seat belt indicator, or the speed limit setting when roading in reverse with the upper frame rotated.
Visibility: large glass areas, rear/side cameras. LED lamps for all working lights and cameras.
For added protection, the optional impact resistant windshield meets the EN356 P5A standard.
Integrated pin code adds anti-theft security to your equipment.

TECHNOLOGY THAT PUSHES PROFITS

Product Link™ connects owners to their equipment, providing access to machine data such as location, hours, fuel consumption, idle time, events, and diagnostic codes.