Cat 310 Z-Line

Machine weight: 12 tons

Bucket size: 500 l

Effect: 50 kW/ 280 Nm

View brochure Request quotation

Rental available

In stock

About the Cat 310 Z-Line

The Cat 310 Z-Line battery-electric hydraulic excavator provides maximum performance without emissions. Pon Equipment introduces our smallest battery-electric excavators under the Z-line series. The Cat 310 Z-line is an emission-free 12-ton tracked excavator based on the Cat 310. This is a fast and stable machine with unique leveling capabilities. It has excellent operator comfort

Machine Specification:

Machine weight: 12 tons
Power: 50 kW / 280 Nm
20kW integrated charger as standard
40kW as an option
100% battery-powered with an operating time of 5-7 hours depending on the application.
Standard bucket: 500 liters
Quick coupler
Reach: 7.6 meters

Charging Performance [kW]	Current Draw [A]	Charging time 10-80% [h]
90	135	1,1

For the operator:

Stick steer
Advanced touch monitor
Cruise control
Keyless start
Air Condition

Specifications

Battery

Effect

50 kW

Weights

Operating Weight	10182 kg
Minimum Operating Weight with Cab*	9601 kg
Maximum Operating Weight with Cab**	10182 kg
Note (2)	**Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.
Note (1)	*Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, long stick, blade and no bucket.

Weight Increase from Minimum Configuration

Counterweight	250 kg
Steel Tracks with Pads	330 kg

Travel System

Maximum Traction Force - Low Speed	84.8 kN
Maximum Traction Force - High Speed	28.9 kN
Travel Speed - High	4.9 km/h
Travel Speed - Low	2.6 km/h
Ground Pressure - Maximum Weight	44.2 kPa
Ground Pressure - Minimum Weight	41.68 kPa
Gradeability - Maximum	30 degrees

Service Refill Capacities

Hydraulic Tank	53 l
Cooling System	10 l
Hydraulic System	140 l

Hydraulic System

Operating Pressure - Swing	230 bar
Digging Force - Bucket	77.7 kN
Operating Pressure - Travel	285 bar
Operating Pressure - Equipment	285 bar
Note	Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Digging Force - Stick	49.2 kN
Type	Load Sensing Hydraulics with Variable Displacement Piston Pump
Pump Flow at 2,400 rpm	233 l/min
Maximum Auxiliary Circuit - Secondary - Flow at Pump	33 l/min
Maximum Auxiliary Circuit - Primary - Pressure at Pump	285 bar
Maximum Auxiliary Circuit - Secondary - Pressure at Pump	285 bar
Maximum Auxiliary Circuit - Primary - Flow at Pump	131 l/min

Swing System

Machine Swing Speed

10.6 r/min

Blade

Height	431 mm
Width - Standard	2470 mm
Width - Wide	2640 mm

Certification - Cab

Top Guard	ISO 10262:1998 (Level I)
Roll Over Protective Structure (ROPS)	ISO 12117-2:2008
Tip Over Protective Structure (TOPS)	ISO 12117:1997

Sound

Average Exterior Sound Pressure (ISO 6395:2008)	99 dB(A)
Operator Sound Pressure (ISO 6396:2008)	72 dB(A)
Note	European Union Directive "2000/14/EC"

Dimensions

Dig Depth

5211 mm

Dimensions - Standard Stick

Tail Swing without Counterweight	1800 mm
Stick Length	2500 mm
Boom In Reach	2116 mm
Maximum Reach	7695 mm
Dig Depth	5211 mm
Ground Clearance - Frame	356 mm
O/A Track Width	2470 mm
Cab Height	2541 mm
Track Belt/Shoe Width	450 mm
Maximum Blade Depth	478 mm
Maximum Dump Clearance	5829 mm
Maximum Dig Height	7970 mm
Maximum Blade Height	421 mm
Tail Swing - Standard Counterweight	1933 mm
O/A Undercarriage Length	3200 mm
Vertical Wall	4385 mm
Swing Bearing - Height	735 mm
Maximum Reach - Ground Level	7570 mm
Overall Shipping Length - with Counterweight	6983 mm
Note (2)	**Boom Height when stick is pinned in working position with attachments.
Note (1)	*Boom Height when stick is pinned in transport position (if available) with no attachments.
Overall Shipping Length - without Counterweight	6850 mm
Height - Boom Transport - No Tools*	2550 mm
Height - Boom Working - With Tools**	2700 mm

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Sustainability

Recyclability

96%

Features

ALL DAY COMFORT

A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A MINI DESIGN

Increased lifting, swinging, travel and multi-functioning performance helps you get the job done more efficiently, and blade float allows for easy clean up.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we've built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.

UNMATCHED DEALER SUPPORT

Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.

SUSTAINABILITY

The Cat® C3.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)