Cat CB10 Split Drum Vibratory Roller

Tandem Vibratory Rollers

About the Cat CB10 Split Drum Vibratory Roller

The CD10 is a 10 metric ton vibratory compactor equipped with 1700 mm (67”) drums. This high production model delivers excellent mat density, good visibility and comfort, fuel efficiency with Eco-mode, and an industry leading water spray system. This model can be equipped with Cat Compaction Control that provides temperature mapping and pass-count mapping as well as "Machine to Machine" communication for more efficient performance. It also offers a wide range of vibratory system choices including Auto-Adjustable Compaction (AAC), or a 2 amplitude,2-frequency system.

Specifications

Weights

Maximum Operating Weight with Cab	25220 lb
Standard Operating Weight with Cab	22311 lb
Maximum Operating Weight with ROPS	24625 lb
Standard Operating Weight with ROPS	21738 lb
Operating Weight	22311 lb

Operating Specifications

Drum Offset	51 in
Maximum Compaction Width	118 in
Static Linear Load	165 lb/in
Travel Speed - Maximum	7.5 mile/h
Standard Compaction Width	67 in

Engine

Gross Power

101.9 HP

Vibratory System

Drum Width	67 in
Centrifugal Force per Drum - Maximum	28977 lb
Centrifugal Force per Drum - Minimum	6092 lb
Minimum Amplitude	0.007 in
Nominal Amplitude - High	0.033 in

Dimensions

Overall Length	14.1 ft
Wheel Base	10.2 ft
Height - With ROPS/FOPS	9.6 ft
Overall Width	74 in
Drum Diameter	44 in

Service Refill Capacities

Fuel Tank Capacity	50 gal (US)
Water Spray Tank Capacity	198 gal (US)

Features

Exceptional Visibility and Control

Comfortable Operating Environment

The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.

Fingertip Control

The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

LCD Display

The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

Convenient Console

The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

Vibratory System Choices

Auto-Adjustable Compaction System

Auto-adjustable compaction delivers faster compaction, increased productivity, and simple operation at a lower cost. Each drum is controlled independently and activation is as simple as the push of a button.

2 Amplitude, 2 frequency Vibratory System

The 2-amplitude and 2-frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

Performance Features

The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

Cat Compaction Control

Temperature Sensors

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

Machine to Machine Communication

Machine to Machine Communication improves worksite efficiency by allowing operators to monitor fleet patterns. The system allows operators to monitor rolling patterns of other machine and pickup where they left off. It also simplifies night-time operation when lighting conditions make it difficult to see after the first pass.

Smooth Operating Powertrain

Cat C3.4B Engine

The C3.4B engine provides 75 kW (101.9 hp) of power and meets emissions equivalent to U.S. EPA Tier 4 Interim and EU Stage IIIB. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).

High Capacity Cooling System

The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The system directs warm air away from the operator for a more comfortable operating environment.