Cat 272D2 Skid Steer Loader

About the Cat 272D2 Skid Steer Loader

The Cat® 272D2 Skid Steer Loader, with its long wheel base and vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.

Specifications

Engine

Engine Model	Cat C3.8 DIT (turbo)
Net Flywheel Power	95 HP
Gross Power - SAE J1995	98 HP
Net Power - SAE 1349	95 HP
Displacement	232 in³
Stroke	4.7 in
Bore	3.9 in
Net Power - ISO 9249	96 HP
Peak Torque - 1,500 rpm - SAE J1995	246 ft·lbf

Weights

Operating Weight	8768 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA batt

Operating Specifications

Rated Operating Capacity	3400 lb
Tipping Load	6800 lb
Breakout Force - Tilt Cylinder	7443 lb
Breakout Force - Lift Cylinder	6074 lb
Rated Operating Capacity with Optional Counterweight	3650 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA batt

Dimensions

Wheel Base	54.6 in
Height - Top of Cab	82.4 in
Vehicle Width over Tires	72 in
Ground Clearance	8.9 in
Departure Angle	27°
Maximum Dump Angle	51°
Bucket Pin Height - Carry Position	7.8 in
Bucket Pin Height - Maximum Lift	127.1 in
Bucket Pin Reach - Maximum Lift	14.7 in
Bumper Overhang - Behind Rear Axle	46.2 in
Clearance at Maximum Lift and Dump	96 in
Length - With Bucket on Ground	155.7 in
Length - Without Bucket	127.6 in
Maximum Overall Height	160.1 in
Maximum Reach - With Arms Parallel to Ground	50.5 in
Rack Back Angle - Maximum Height	84°
Reach - Maximum Lift/Dump	30.3 in
Turning Radius from Center - Bucket (racked)	89.8 in
Turning Radius from Center - Coupler	58.3 in
Turning Radius from Center - Machine Rear	74.7 in
Roll Back Angle	28°

Hydraulic System

Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	76 HP
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	32 gal/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44 HP
Hydraulic Flow - Standard - Loader Hydraulic Flow	23 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi

Cab

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II

Power Train

Travel Speed - Forward or Reverse - One Speed	6.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option	9.4 mile/h

Service Refill Capacities

Cooling System	4.1 gal (US)
Engine Crankcase	3.5 gal (US)
Fuel Tank	32.2 gal (US)
Hydraulic System	14.5 gal (US)
Hydraulic Tank	10.3 gal (US)
Chain Box - Each Side	2.7 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	102 dB(A)

Features

ComfortableCab

Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes Cat Skid Steer Loaders the industry leader in operator comfort.

Advanced Display

Maximize machine capability and control with the standard Advanced Display providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

Powerful Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, optional two speed travel and an electronic hand/foot throttle with decel pedal capability. High Flow XPS hydraulic system is available for applications that demand maximum hydraulic work tool performance. Electronically controlled Cat C3.8 engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final/EU Stage IV emission standards. Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and optional features such as dual direction self level, work tool return to dig and work tool positioner.

Ride Control

Speed Sensitive Ride Control option improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.