Cat 232D Skid Steer Loader

About the Cat 232D Skid Steer Loader

The Cat® 232D Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.

Specifications

Engine

Engine Model	Cat C2.2 CRDI
Net Flywheel Power	65.8 HP
Gross Power - SAE J1995	67.1 HP
Net Power - SAE 1349	65.8 HP
Displacement	134.3 in³
Stroke	3.9 in
Bore	3.3 in
Net Power - ISO 9249	66.5 HP
Peak Torque - 1,500 rpm - SAE J1995	153 ft·lbf

Weights

Operating Weight	6213 lb
Note	*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual qui

Operating Specifications

Rated Operating Capacity	1850 lb
Tipping Load	3700 lb
Breakout Force - Tilt Cylinder	3984 lb
Rated Operating Capacity with Optional Counterweight	1950 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Dimensions

Wheel Base	41.5 in
Height - Top of Cab	79.9 in
Vehicle Width over Tires	58.9 in
Ground Clearance	6.7 in
Departure Angle	27.9°
Maximum Dump Angle	47.4°
Bucket Pin Height - Carry Position	8.4 in
Bucket Pin Height - Maximum Lift	118.1 in
Bucket Pin Reach - Maximum Lift	8.8 in
Bumper Overhang - Behind Rear Axle	35.2 in
Clearance at Maximum Lift and Dump	88.7 in
Length - With Bucket on Ground	127.3 in
Length - Without Bucket	99.3 in
Maximum Overall Height	150.9 in
Maximum Reach - With Arms Parallel to Ground	49.2 in
Rack Back Angle - Maximum Height	88.2°
Reach - Maximum Lift/Dump	25.7 in
Turning Radius from Center - Bucket	77.8 in
Turning Radius from Center - Coupler	43.4 in
Turning Radius from Center - Machine Rear	59.6 in
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Hydraulic System

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	50.9 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow	26 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure	3336 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	35.5 HP
Hydraulic Flow - Standard - Loader Hydraulic Flow	18 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3336 psi

Cab

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II

Power Train

Travel Speed - Forward or Reverse - One Speed	7.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option	11.1 mile/h

Service Refill Capacities

Cooling System	3.2 gal (US)
Engine Crankcase	2.6 gal (US)
Fuel Tank	15.1 gal (US)
Hydraulic System	11.9 gal (US)
Hydraulic Tank	9 gal (US)
Chain Box - Each Side	1.8 gal (US)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	101 dB(A)

Features

Comfortable Cab

Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes the D Series the industry leader in operator comfort.

Advanced Display

Maximize machine capability and control with optional Advanced Display providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

Powerful Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, optional two speed travel and an electronic hand/foot throttle with decel pedal capability. High Flow hydraulic system is available for applications that demand maximum hydraulic work tool performance. Electronically controlled Cat C2.2 engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final (EU Stage IIIB) emission standards. Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and optional features such as dual direction self level, work tool return to dig and work tool positioner.

Ride Control

Speed Sensitive Ride Control option improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.